Radiators for halls, landings and entrances, where walls are narrow and broken up by doors. Choose a tall vertical radiator, a column radiator, or a panel radiator no wider than 600mm. Estimate the heat output you need, then compare sizes and finishes.
Hallways rarely have a long, clear wall. This collection groups radiators that suit tight spaces:
Measure the wall, allow room for the valves and pipes, and check the door swing before you choose. In a hall with a staircase, the space under the stairs or on the landing can also take a radiator.
Our BTU calculator uses its lowest allowance for hallways. It gives a rough estimate only: a hall with a front door that is opened often, a stairwell rising to the floor above or single glazing can need more. Where a product page lists a heat output, compare it with your estimate. Outputs are only directly comparable when both products state the same ΔT.
Finishes vary by range. White, anthracite, black, chrome and brass are among those named in this collection; the product page shows the options for each model.
A vertical radiator and a horizontal one with the same output take up very different areas of wall, so compare the height and width on each product page as well as the output. Vertical designer ranges come in flat, tubular and column styles.
Browse designer radiators and column radiators, read our guide to choosing a radiator, or A Home for Every Radiator: Choosing Room by Room.
It can, if its listed heat output meets the room's needs. Compare the product's output with an estimate from our BTU calculator.
