Myson Premier HE Imperial panel radiators are sized in inches, with the metric size in every product name. Choose a 15, 21 or 27 inch height and a Type 11 (K1), Type 21 (P Plus) or Type 22 (K2) panel, finished in RAL 9016 traffic white for central heating.
Every radiator in this range is listed in inches first and millimetres second, for example 21 × 37 inch (530 × 946 mm), so you can compare it directly with the radiator you are taking off the wall. Measure the height, the width and the position of the pipework on your existing radiator before you choose.
If your current radiators are metric, the Myson Premier HE Metric range covers the same family in millimetre sizes.
Myson's own pages describe these panels by Type number. The product names in this range use the K1, P Plus and K2 names, so both are given here.
One panel with one set of convector fins.
Two panels with one set of fins between them.
Two panels with two sets of fins. In every matching size in this range, the K2 lists a higher output than the K1 of the same height and width.
Start with the heat the room needs. Our BTU calculator gives an estimate in BTU; compare it with the output on each product. Myson publishes Premier HE outputs to EN 442, including figures at ΔT50 (75/65/20 °C). Each product page shows its rated output, and the test condition (ΔT) where it is stated. Outputs are only directly comparable when both products state the same ΔT.
The whole range is finished in RAL 9016 traffic white and is designed for wet central heating systems.
Use the radiator finder to filter by height, width and output, browse every Myson radiator, or compare panel radiators from other brands.
Yes. Each product name gives the size in inches with the metric equivalent, for example 21 × 37 inch (530 × 946 mm).
15, 21 and 27 inch heights (390, 530 and 690 mm).
RAL 9016 traffic white.
