Stelrad Compact With Style covers both directions: horizontal radiators from a low 200 mm height, and vertical radiators from 1600 to 2200 mm tall. Choose a single K1, double K2 or double P2 build, all in RAL 9016 traffic white, for a wet central heating system.
This range is listed under designer radiators because it offers the same family in two orientations, so you can keep one look across a room or a whole house.
Heights of 200, 300, 500 and 600 mm, with widths up to 2000 mm. The 200 and 300 mm heights are the lowest in the range.
Heights of 1600, 1800, 2000 and 2200 mm. A vertical radiator uses wall height rather than wall width.
To see vertical sizes only, filter by orientation. Check the height in the specification table: some vertical product names give the width first, so "Stelrad Compact With Style 300mm x 1800mm" is an 1800 mm tall radiator, 300 mm wide.
A lower or narrower radiator gives less heat, so check the numbers. Get an estimate of the room's needs from the BTU calculator, which gives a figure in BTU, and compare it with each product's listed output. Each product page shows its rated output, and the test condition (ΔT) where it is stated. Outputs are only directly comparable when both products state the same ΔT.
If you only need horizontal panels, the Stelrad Softline and Stelrad Vita Compact ranges are worth comparing. The radiator finder searches every brand by height, width and output.
Yes, in 1600, 1800, 2000 and 2200 mm heights.
200 mm.
