Stelrad Softline panel radiators are offered in 300, 450, 600 and 700 mm heights and widths from 400 to 2000 mm. Choose a single K1, double P Plus or double K2 panel, each finished in RAL 9016 traffic white for wet central heating systems, then pick the size and output you need.
The range runs from 300 mm up to 700 mm high, with widths from 400 to 2000 mm. Each product name gives the size and panel type, for example "Stelrad Softline 450mm x 1000mm Double P Plus", with the height first.
Searches for Softline often name the panel type, so here is how they differ.
A single panel with one set of convector fins, and the lowest output of the three at a given size.
Two panels with one set of fins. P Plus sits between K1 and K2 on output.
Two panels with two sets of fins. In every Softline size offered as both, the K2 lists a higher output than the K1.
Get an estimate of the heat the room needs from our BTU calculator, which gives a figure in BTU, then compare it with the output in each product listing. Each product page shows its rated output, and the test condition (ΔT) where it is stated. Outputs are only directly comparable when both products state the same ΔT.
If you are replacing an existing radiator, measure its height, width and depth and note where the pipes come out of the wall.
Softline sits alongside the Stelrad Elite and Stelrad Vita Compact ranges. Compare them in the Stelrad collection, or use the radiator finder to search every brand by size and output.
300, 450, 600 and 700 mm.
Yes, at the same height and width. Across the 43 Softline sizes offered in both, the double K2 lists a higher BTU output than the single K1.
RAL 9016 traffic white.
